搜索
ss
ss
APPLICATION
/
/
/
Electrode coating thickness measurement

Electrode coating thickness measurement

Number of views:
1000

Electrode coating thickness measurement

Scan a line, take the substrate as the reference plane to measure the level difference with the coating, which is the thickness of the coating
Product serial number
Product description
Parameters

Measurement requirements
Scan a line, take the substrate as the reference plane to measure the level difference with the coating, which is the thickness of the coating

 

Overview of key features
1. Non-contact measurement, integrated design
2. Wide range of application, easy to assemble and disassemble
3. ±0.5 to ±1μm repeatability guarantee
4. One-line scanning, the speed can reach 50mm/s, which greatly improves the detection speed
5. Off-line detection, thickness data storage, form management statistics/analysis basic data
6. Rich alarm functions, OK, NG prompts, monitor the whole process of measurement, control quality, and improve efficiency

 

img

 

Measurement results
The coating thickness is about 18μm±1μm

 

Solve the problems of the current measuring device

1. There are certain requirements for measurement materials
2. Contact measurement, damage to the measurement material
3. The measurement range is small, the position is uncertain, and the measurement is difficult
4. The measurement speed is slow, the precision is low, and the measurement error is large

5. Complex structure and high cost

We could not find any corresponding parameters, please add them to the properties table
×

Hotline:021-37781691

E-Mail:contact@think-focus.com

Address:Dongshe Road, Dongjing Town, Songjiang District, Shanghai Room 204, 2nd Floor, Building 3, No. 50

Copyright © 2022 Vision Optoelectronics Technology (Shanghai) Co., Ltd.   沪ICP备16050549号-1
SEO       Technical Support: 300.cn  px