搜索
ss
ss
APPLICATION
/
/
/
Edge measurement of stamping parts

Edge measurement of stamping parts

Number of views:
1000

Edge measurement of stamping parts

Category:
Cell phone
Scan and measure the height difference between the folded portion of the sheet metal edge and the sheet metal substrate, and repeat the measurement to verify repeatability
Product serial number
Product description
Parameters

Measurement requirements
Scan and measure the height difference between the folded part of the edge of the metal sheet and the metal sheet substrate, and repeat the measurement to verify the repeatability

 

Overview of key features

1. Non-contact measurement, integrated design

2. Wide range of applications, easy assembly and disassembly

3.±0.5 to ±1μm repeatability guarantee

4. One-line scanning, the speed can reach 50mm/s, greatly improving the detection speed

5. Offline detection, thickness data storage, forming basic data for management statistics/analysis

6. Rich alarm functions, OK, NG prompts, monitor the whole process of measurement, control quality, and improve efficiency

 

img

 

Measurement results
The height difference is about 950μm, and the repeatability is good

 

Solve the problems of the current measuring device

1. There are certain requirements for measurement materials
2. Contact measurement, damage to the measurement material
3. The measurement range is small, the position is uncertain, and the measurement is difficult
4. The measurement speed is slow, the precision is low, and the measurement error is large

 

5. Complex structure and high cost

We could not find any corresponding parameters, please add them to the properties table
×

Hotline:021-37781691

E-Mail:contact@think-focus.com

Address:Dongshe Road, Dongjing Town, Songjiang District, Shanghai Room 204, 2nd Floor, Building 3, No. 50

Copyright © 2022 Vision Optoelectronics Technology (Shanghai) Co., Ltd.   沪ICP备16050549号-1
SEO       Technical Support: 300.cn  px