With the continuous progress of science and technology, all walks of life have also been greatly developed, about the development of 3D profile measuring instrument The prospect is also very good, so the demand continues to increase, and there are also many manufacturers on the market. As a manufacturer, we will tell you the knowledge points of 3D contour measuring instrument, and interested friends can come and see it together.

Before using the three-dimensional profile measuring instrument, there are many problems with you, so if you want to use it better, you must understand some knowledge points. First of all, it should be clear that the three-dimensional profile measuring instrument is based on the blue-light 3D scanning stripe technology. During the image acquisition process, it can effectively filter the ambient light interference during operation, so it can be seen in many places. Moreover, for dark surfaces and reflective surfaces, the quality and accuracy of 3D scanning can be improved, and the quality of 3D data can be improved. In addition, the three-dimensional profile measuring instrument can adjust the calibration state and conversion accuracy during the working process. Of course, in addition to these, the environmental changes and component displacements can also be continuously monitored and compensated accordingly. Only in this case can the system process the working status well and ensure the reliability of the 3D scanning measurement data. performance and high precision.

In addition, the three-dimensional profile measuring instrument is based on the principle of binocular stereo vision and adopts the international advanced heterodyne multi-frequency phase shift technology. What everyone needs to know when using it in the future is that it actually collects images in industrial cameras according to the principle of stereo photography. It is more advantageous for 3D scanning measurement of large-sized objects, complex curved surfaces and flexible surfaces. So it's all done well in these places. Of course, you also need to know that the 3D profile measuring instrument actually has some multi-hybrid scanning technologies. By performing a specific calibration process on the industrial camera and the projection head, you will find that it is still possible to make two industrial cameras and projection heads at work. It forms a measurement unit, and in addition, it can improve the range and data quality of a single effective measurement during work, especially for some complex curved surfaces such as deep holes and grooves, as well as reflective surfaces. If consumers want to buy this type of product, remember to shop around. This is an era of informationization. There is no need for everyone to go to the market and go back and forth. You can directly search for relevant manufacturers on the Internet.